Purple Cheetah Face Masks This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 906F attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the non-woven interfacing. I’ve sewn, into the mask, a flexible 1-3/4” Nose Bridge for comfort. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic knot loose so a person or parent can adjust the knot so that it will best fit the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these for the last year and they have been washed countless times without any issues. However, the mask fabric may shrink slightly with the first washing due to the cotton content. It’s always best to wash the masks by hand. Thank you for checking out my handmade products!
close

Purple Cheetah Face Masks This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two ... more

OU Blocks-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school the face masks can at least be fun for everyone! This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD and/or 906F) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with Tide antibacterial fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks. P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

OU Blocks-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school the face ... more

Batik Gems-Solid Backs: This particular face mask has 3 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a single piece of non-woven fusible interfacing (Pellon 931TD and/or 906F) between the outer layers. It’s very breathable and pretty at the same time. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with a fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks! P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

Batik Gems-Solid Backs: This particular face mask has 3 layers to it: a tightly woven cotton/cotton-polyester blend for the two ... more

Day of the Dead Black-Solid Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD, 906FF and/or 906F) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are different so I am leaving the elastic loose so a person or parent can tie the knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with Tide fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks!
close

Day of the Dead Black-Solid Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for ... more

Day of the Dead Red-Solid Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD, 906FF and/or 906F) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie the knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with Tide fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks!
close

Day of the Dead Red-Solid Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for ... more

Fonts Galore-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school I figured the face masks can at least be fun for everyone! This particular face mask has 3 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a single piece of non-woven fusible interfacing (Pellon 931TD and/or 906F) ) between the two outer layers. It is easy to breathe through and pretty. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with a fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks! P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

Fonts Galore-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school I figured ... more

Pink Cheetah-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school I figured the face masks can at least be fun! This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD and/or 906F) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. Thank you for checking out my face masks! P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

Pink Cheetah-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school I figured ... more

Tattoos on Teal-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school the face masks can at least be fun! This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD and/or 906F) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe though but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with Tide fabric sanitizer and place them in see-through bags . Thank you for checking out my face masks. P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

Tattoos on Teal-Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school the ... more

Easter Eggs on Black Face Masks This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 906F attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the non-woven interfacing. I’ve sewn, into the mask, a flexible 1-3/4” Nose Bridge for comfort. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic knot loose so a person or parent can adjust the knot so that it will best fit the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these for the last year and they have been washed countless times without any issues. However, the mask fabric may shrink slightly with the first washing due to the cotton content. It’s always best to wash the masks by hand. Thank you for checking out my handmade products!
close

Easter Eggs on Black Face Masks This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for ... more

Unicorns on Black-Assorted Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school the face masks can at least be fun for everyone. This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with Tide antibacterial fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks. P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

Unicorns on Black-Assorted Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school ... more

Ladies/Teens Arkansas Abbreviation on Gray/Solid Gray Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD, 906F and/or 906FF) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used this style for six plus months and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. It’s best to wash them by hand. Thank you for checking out my face masks!
close

Ladies/Teens Arkansas Abbreviation on Gray/Solid Gray Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend ... more

T/L Razorback Blocks- Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school because of the Coronavirus the face masks can at least be fun for everyone! This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD and/or 906F) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are different so I am leaving the elastic loose so a person or parent can tie the knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. As a precaution, I spray the finished masks with Tide antibacterial fabric sanitizer and place them in see-through bags. Thank you for checking out my face masks! FYI: The face mask model just turned 5 years old and his mask had not been washed yet. P.S. With each order you will receive one free lanyard to hook through one side of the ear elastic of the face mask. My grandchildren’s teachers have recommended this so when a child removes their face mask it won’t accidentally fall to the ground. (A child is not allowed to put a face mask back on that has fallen to the ground because, at that point, it has become compromised.)
close

T/L Razorback Blocks- Solid Backs: Since the State of Arkansas has made it mandatory to wear face masks during school ... more

Arkansas Razorbacks Tossed/Solid Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two outer layers and a non-woven fusible interfacing (Pellon 931TD, 906F and/or 906FF) attached to the inside of both outer layers. Four layers might sound thick and hard to breathe through but it’s really not because of the light weight of the interfacing. I’ve sewn, into the mask, a piece of encased, 18 gauge, no rust, bendable copper wire for the bridge of nose for a closer fit when bent. The face mask attaches over the ears with a soft cotton spandex elastic. Every head and set of ears are a little different so I am leaving the elastic loose so a person or parent can tie a knot that best fits the head, face & ears. Slide the tied knot into the side sleeve so it doesn’t show. My family has used these all summer and they have been washed numerous times without any issues. However, the mask fabric will shrink slightly with the first washing due to the cotton content. It’s best to wash by hand. Thank you for checking out my face masks!
close

Arkansas Razorbacks Tossed/Solid Back: This face mask has 4 layers to it: a tightly woven cotton/cotton-polyester blend for the two ... more